Teradek Bolt Pro 2000 Wireless HD-SDi Video TX/RX

The Teradek Bolt Pro 2000 Professional Wireless HD-SDI Video TX/RX is a latency-free wireless transmission system that sends 4:2:2, 1080p60 video up to two thousand feet. This Bolt Pro 2000 system comes in a set of 1 transmitter and 1 receiver. The transmitter features a loop through SD/HD/3G-SDI output, so you can transmit video and send the output from the camera to a monitor or deck. It features 4-LED indicator lights that indicate battery level.

The Bolt Pro 2000 system is suitable for exterior and interior shoots, and it features Dynamic Frequency Selection that allows it adjust the frequency bands it is using in real time to avoid interference. This Bolt Pro 2000 comes with 1 receiver that features 2 x SD/HD/3G-SDI outputs and an AC power adapter.

Detailed Specs:

Manufacturer: Teradek
Categories:

Full Description:

The Teradek Bolt Pro 2000 Professional Wireless HD-SDI Video TX/RX is a latency-free wireless transmission system that sends 4:2:2, 1080p60 video up to two thousand feet. This Bolt Pro 2000 system comes in a set of 1 transmitter and 1 receiver. The transmitter features a loop through SD/HD/3G-SDI output, so you can transmit video and send the output from the camera to a monitor or deck. It features 4-LED indicator lights that indicate battery level.

The Bolt Pro 2000 system is suitable for exterior and interior shoots, and it features Dynamic Frequency Selection that allows it adjust the frequency bands it is using in real time to avoid interference. This Bolt Pro 2000 comes with 1 receiver that features 2 x SD/HD/3G-SDI outputs and an AC power adapter. V-Mount or Anton Bauer type battery plates are available.
Connectivity

The Bolt transmits uncompressed video using WSDI Pro, which provides a wireless range of up to 2,000' (609.6 m) and can co-exist with other wireless equipment by dynamically adjusting the frequency bands used in real time.

LED Indicators
The transmitter and receiver each feature LED indicators for Video signal and Link. The receiver features Video, Link, and Ready LED indicators.

Rugged & Low Power
Bolt Pro transmitters and receivers are housed in a milled aluminum chassis. The transmitter requires approximately 7W of power, while the receiver consumes only 6W. To power these units for long periods of time, a Lemo to P-tap cable (included) can be used to connect with available external power sources such as V-mount or AB Gold-mount batteries.

Transmitter

Input SD/HD/3G-SDI
Output Looping 3G-SDI
Resolution Up to 1080p60
Frequency 5.1 to 5.8 GHz
Wireless Range 2000' (609.6 m)
Power 7 W
Cable Lemo 6 to 28 VDC input (Pin 1 GND, Pin 2 +DC,
0B 302 series Lemo)
Encryption AES128
Audio 2-channel
Chassis Milled aluminum
Mounting Multiple mounting options with 1/4"-20 holes
Mount Accessory shoe mount
Temperature 32 to 122°F (0 to 50°C)
Dimensions 4.3 x 2.6 x 1.0" (10.9 x 6.6 x 2.54 cm)
Weight 8.8 oz (249 g)

Receiver

Output 2 x SD/HD/3G-SDI
Resolution Up to 1080p60
Power 6 W
Cable Lemo 6 to 28VDC
Mounting Multiple 1/4"-20 threaded mounting hole
Dimensions 6.0 x 4.6 x 1.0" (15.2 x 11.7 x 2.54 cm)
Weight 1.05 lb (476 g)

Rent this piece of gear